| Products 25' Bubble Tubing™ diffuser
|
The most efficient, even in shallow water, and easiest to install of all diffusers. Very affordable too!
The
principal function of the diffuser tubing is to aerate and create circulation
and the tubing can be used as a replacement with traditional aeration diffuser
systems like membrane discs and airstones. But why use a linear aeration featuring
Bubble Tubing™?
Instead of having bubbles concentrated
in 12" space of a diffuser disc you spread out the release of small
air bubbles down a linear line of 25 feet. The flexible tubing
can be placed in large circles or soft curves to fit into hard to reach areas
to provide aeration in more places at once, something a single disc simply cannot
do! But linear aeration is not limited to shallow ponds and dugouts. Large lakes
often use multiple lines of Bubble Tubing™ not to mention the traditional
uses in water treatment plants and shrimp aeration projects where long lengths
of air tubing are required to aerate large flat bottomed basins.
Bubble
Tubing™ set in the bottom of a shallow pond will mix water with more efficacy
because the tiny diffuser holes on the tubing, spaced 4 per inch, are spread out
over a larger area than when using a single disc or discs. Running
a single line or multiple lines of tubing allows for greater dispersion of bubbles
throughout the pond and enables a larger area to be treated with beneficial circulation
and oxygenation.
Using
Bubble Tubing™ is easier than discs or airstones because it is self sinking
and flexible so there are no weights to attach, bases to fill, or plumbing parts
to break. Rising bubbles from the Bubble Tubing are gentler than
the frothing splash of discs or airstones and because the Bubble Tubing™
can run in long lengths it can get quality aeration into vast areas.
Using traditional forms of diffuser discs in shallow ponds can be less efficient as the rising bubbles are so closely concentrated that there is little rising lifting action that can occur before they splash at the surface. The aeration is less effective and the surface of the water is in a constant state of aggressive agitation. At greater depths the disc or airstone type diffuser is highly effective but in shallow waters the resulting circulation is overly concentrated and does not positively impact the entire body of water to the extent of linear aeration using Bubble Tubing™, beyond creating waves and frothing water. Plus, many discs are often needed to effectively aerate shallow areas adding to expense and tubing runs. In shallow ponds, diffuser discs or multiple disc assemblies create minimal overall circulation because the bubbles are concentrated in a small area. Bubble Tubing™ changes all that!
Technical InformationOPTION: Sold with a "Y" PVC
connector and stainless steel clamp to install in a ring layout or with a PVC
plug and stainless steel clamp to install in a line. One 1/2" PVC connector
with clamp to connect to main airline also included. ■Inside
diameter: 0.575" | ||
User's Guide
Produits connexes
|







